Configure an IKEv2 Profile

profile WORD<1–32>

Specifies the IKE v2–profile name.

hash-algo <md5|sha|sha256|any>

Specifies the type of hash algorithm. The default value is sha256. To set this option to the default value, use the default operator with the command: default ike v2–profile WORD<1–32> hash-algo

encrypt-algo <desCbc|3DesCbc|aesCbc|any>

Specifies the type of encryption algorithm. The default value is aesCbc. To set this option to the default value, use the default operator with the command: default ike v2–profile WORD<1–32> encrypt-algo

integrity-algomd5|sha-1|sha-256|aes-xcbc

Specifies the type of integrity algorithm. The default is sha256. To set this option to the default value, use the default operator with the command: default ike v2–profile WORD<1–32> integrity-algo

dh-group <modp768|modp1024|modp2048|any>

Specifies the Diffie-Hellman (DH) group. DH groups categorize the key used in the key exchange process, by its strength. The key from a higher group number is more secure. The default value is modp2048. To set this option to the default value, use the default operator with the command: default ike v2–profile WORD<1–32> dh-group

encrypt-key-len <128|192|256>

Specifies the length of the encryption key. The default is 256. To set this option to the default value, use the default operator with the command: default ike v2–profile WORD<1–32> encrypt-key-len

lifetime-sec <0-4294967295>

Specifies the lifetime value in seconds. The lifetime ensures that the peers renegotiate the SAs just before the expiry of the lifetime value, to ensure that Security Associations are not compromised. The default value is 86400 seconds. To set this option to the default value, use the default operator with the command: default ike v2–profile WORD<1–32> lifetime-sec